3.20 sft/ kg or 0.297 m2 at 6mm thick bed with 4 blocks.
Country of Origin
Made in India
Masonry Glue 110
Greater Than Or Equal To 5N/mm2 @28 days
Tensile Adhesion Strength
Greater Than Or Equal To 0.6N/mm2 @28 days
Premium quality jointing motor for all Masonry work for quick and secure laying of Bricks and Blocks. NCL Block Jointing Mortar, is grey cement based thin coat adhesive for binding the AAC, CLC, Solid cement blocks & fly ash bricks, having good compression strength and excellent surface adhesion NCL Block Jointing Mortar is used for laying AAC, CLC and fly ash Blocks. NCL Block Jointing Mortar is a thin jointing mortar with good bonding strength that will save 50 % on mortar cost compared to traditional mortars. Other Features: No water curing required after application. Dressing of joints not required before plastering. Very economical as the jointing material quantity is far less than traditional joint mortar. Converge: 3.20 sft/ kg or 0.297 m2 at 6mm thick bed with 4? blocks. 1.28 sft / kg or 0.119 m2 / kg at 6mm thick bed with 9? blocks
Packing: Delivered as dry premixed products in 40 kg HDPE bag.
BuildWell Block Jointing Mortar by Walplast is a superior water resistant cement based mortar specially formulated for joining blocks. This mortar is specially designed and manufactured under stringent quality controls to give superior adhesive strength, higher durability and a strong bond between the blocks. This unique combination enables this mortar to be thinner, compact and versatile.
Saving of time and manpower.
Lesser shrinkage and seamless structure.
High strength adhesion.
Consistency of material and quality.
Can be applied by an ordinary mason.
Gives better levelling.
Easy to mix and faster to apply.
No water curing is required.
Thinner layer guarantees to be more cost-effective.
It is Polymer modified pre-mixed, you only need to add water.
Prevents seepages and water percolation.
Excellent bonding to the AAC Blocks.
Thickness of only 3mm compared to 12mm of a conventional mortar.
How To Apply:-
The AAC, fly ash and hollow blocks should be dry, clean and pre-wet before application. Do not apply on dirty/greasy surface.
Add BuildWell Block Jointing Mortar to water and mix well for 5-10 minutes (Recommended mixture is 23% water).
Apply the mix on clean, dry block surface, with mason’s notch trowel to make an even 3-4mm joint layer.
Correction time for re-alignment is up to 10 minutes to ensure perfection of block placement.
BuildWell Block Jointing Mortar is self-curing and does not require water curing post application.
BuildWell Block Jointing Mortar is now ready for plastering application.